- 产品描述
- 手机端详情
-
Model Numbers: • 07700100 PQV-100V • 07700160 PQV-160V • 07705100 PQV-100 • 07705160 PQV-160 • 07700130 PQV-130V • 07700200 PQV-200V • 07705130 PQV-130 • 07705200 PQV-200S
Characteristics
• The double-lever pneumatic quick vise is a high-speed clamping fixture specially designed for mass-production machining on MC vertical multi-tasking machining centers, milling machines, and drilling machines.
• Clamping system: toggle mechanism + pneumatic actuation.
• The dual-force mechanism, when paired with compressed air, delivers rapid operation and high clamping force, and requires only connection to a compressed-air supply—eliminating the need for oil-based actuation and thereby preventing the risk of oil leakage.
• This vise is equipped with a safety back-stand device that ensures the clamping force remains locked even if the compressed air supply is suddenly interrupted, providing high safety.
• Simple operation: the vise is opened and closed solely via a manual switch, or it can be integrated with automated control to achieve an FMC unmanned system.
• Opening and closing range: 0–4 mm safety clearance to prevent fingers from being drawn into the opening/closing area and sustaining injury (safety design).
• The opening and closing time is only 1.5 seconds, and the clamping range can be freely adjusted from 0 to 200 mm (the optimal clamping condition is achieved when the workpiece length is increased by an additional 2 mm).
• This vise can be used in parallel with multiple units, and only requires a single compressed-air source, making it simple and convenient.
• The clamping force can be freely adjusted from 0 to 4,000 kgf using the pneumatic pressure regulator (pressure values are shown in the attached table).
• Robust Material – The vise body is made of ductile graphite cast iron (FCD600, with a tensile strength of 60 kgf/mm² or 80,000 psi), offering exceptional tensile strength, superior wear resistance, and excellent dimensional stability.
• The sliding surfaces of the vise body are all subjected to hardening heat treatment with a Rockwell hardness of HRC 45 or higher, ensuring long-lasting wear resistance and dimensional accuracy.
• The corner-clamping hemispherical pad generates corner-clamping locking force, effectively eliminating the floating of the jaw plate and workpiece tilt.
• This vise can be used in a vertical position and is suitable for use with dedicated machines and vertical machining centers.
No Inspection Items JIS Class 1 standard Permissible accuracy 1 Parallelism between the two jaw plates 0.020mm 0.020mm 2 Parallelism between the bottom keyway of the vise and the jaw plate 0.020mm 0.015mm 3 Perpendicularity between the vise and the worktable 0.020mm 0.010mm 4 Parallelism between the vise base and the sliding surface 0.020mm 0.010mm 5 Parallelism after workpiece clamping 0.030mm 0.020mm 6 Parallelism of Workpieces with Large Jaw Opening in a Vise 0.050mm 0.030mm 
Standard Accessories
1. Handle Set 1
2. Two correction keys
(M6×10L) screws × 2
3. Vise fixing blocks × 4 unitsSpecial Attachments
1. Special Tiger’s Mouth (P81, 82)
Schematic Diagram of Air Compressor Source and Clamping Force
Order Number Model A B C D E F G 07700100 PQV-100V 442 340 102 101 130 133 96 07705100 PQV-100S 442 340 102 101 130 133 96 07700130 PQV-130V 507 405 102 131 152 155 100 07705130 PQV-130S 507 405 102 131 152 155 100 07700160 PQV-160V 534 432 102 161 160 163 115 07705160 PQV-160S 534 432 102 161 160 163 115 07700200 PQV-200V 627 525 102 201 185 188 125 07705200 PQV-200S 627 525 102 201 185 188 125 07706160 PQV-160V-L 604 502 102 161 160 163 115 Order Number Model H I J K L M N X 07700100 PQV-100V 15 105 0~105 48 95 14 16 45 07705100 PQV-100S 15 105 0~105 48 95 14 16 45 07700130 PQV-130V 15 115 0~140 55 95 14 18 65 07705130 PQV-130S 15 115 0~140 55 95 14 18 65 07700160 PQV-160V 15 130 0~150 58 105 14 18 65 07705160 PQV-160S 15 130 0~150 58 105 14 18 65 07700200 PQV-200V 18 150 0~200 63 105 14 18 82 07705200 PQV-200S 18 150 0~200 63 105 14 18 82 07706160 PQV-160V-L 15 130 0~220 58 105 14 18 65 Order Number Model X=0/-0.02 Y Y=0/-0.02 Clamping force (7 kgf) 07700100 PQV-100V YES 85 YES 11 kN (1078 kgf) 07705100 PQV-100S NO 85 NO 11 kN (1078 kgf) 07700130 PQV-130V YES 100 YES 16 kN (1568 kgf) 07705130 PQV-130S NO 100 NO 16 kN (1568 kgf) 07700160 PQV-160V YES 105 YES 21 kN (2058 kgf) 07705160 PQV-160S NO 105 NO 21 kN (2058 kgf) 07700200 PQV-200V YES 125 YES 41 kN (4018 kgf) 07705200 PQV-200S NO 125 NO 41 kN (4018 kgf) 07706160 PQV-160V-L YES 105 YES 21 kN (2058 kgf) Order Number Model Itinerary Net Weight (N.W.) Gross Weight (G.W.) Shipment Size 07700100 PQV-100V 0~3 m/m 27kg 29kg 600×220×185 07705100 PQV-100S 0~3 m/m 27kg 29kg 600×220×185 07700130 PQV-130V 0~3 m/m 40kg 42kg 665×250×205 07705130 PQV-130S 0~3 m/m 40kg 42kg 665×250×205 07700160 PQV-160V 0~4 m/m 52kg 55kg 760×280×215 07705160 PQV-160S 0~4 m/m 52kg 55kg 760×280×215 07700200 PQV-200V 0~4 m/m 83kg 86kg 860×320×225 07705200 PQV-200S 0~4 m/m 83kg 86kg 860×320×225 07706160 PQV-160V-L 0~4 m/m 54kg 58kg 760×280×215 -
Model Numbers: • 07700100 PQV-100V • 07700160 PQV-160V • 07705100 PQV-100 • 07705160 PQV-160 • 07700130 PQV-130V • 07700200 PQV-200V • 07705130 PQV-130 • 07705200 PQV-200S
Characteristics
• The double-lever pneumatic quick vise is a high-speed clamping fixture specially designed for mass-production machining on MC vertical multi-tasking machining centers, milling machines, and drilling machines.
• Clamping system: toggle mechanism + pneumatic actuation.
• The dual-force mechanism, when paired with compressed air, delivers rapid operation and high clamping force, and requires only connection to a compressed-air supply—eliminating the need for oil-based actuation and thereby preventing the risk of oil leakage.
• This vise is equipped with a safety back-stand device that ensures the clamping force remains locked even if the compressed air supply is suddenly interrupted, providing high safety.
• Simple operation: the vise is opened and closed solely via a manual switch, or it can be integrated with automated control to achieve an FMC unmanned system.
• Opening and closing range: 0–4 mm safety clearance to prevent fingers from being drawn into the opening/closing area and sustaining injury (safety design).
• The opening and closing time is only 1.5 seconds, and the clamping range can be freely adjusted from 0 to 200 mm (the optimal clamping condition is achieved when the workpiece length is increased by an additional 2 mm).
• This vise can be used in parallel with multiple units, and only requires a single compressed-air source, making it simple and convenient.
• The clamping force can be freely adjusted from 0 to 4,000 kgf using the pneumatic pressure regulator (pressure values are shown in the attached table).
• Robust Material – The vise body is made of ductile graphite cast iron (FCD600, with a tensile strength of 60 kgf/mm² or 80,000 psi), offering exceptional tensile strength, superior wear resistance, and excellent dimensional stability.
• The sliding surfaces of the vise body are all subjected to hardening heat treatment with a Rockwell hardness of HRC 45 or higher, ensuring long-lasting wear resistance and dimensional accuracy.
• The corner-clamping hemispherical pad generates corner-clamping locking force, effectively eliminating the floating of the jaw plate and workpiece tilt.
• This vise can be used in a vertical position and is suitable for use with dedicated machines and vertical machining centers.
Standard Accessories
1. Handle Set 1
2. Two correction keys
(M6×10L) screws × 2
3. Vise fixing blocks × 4 unitsSpecial Attachments
1. Special Tiger’s Mouth (P81, 82)
Schematic Diagram of Air Compressor Source and Clamping Force
Exhibition
Introduction
Baoding Fanxu Machinery Manufacturing Co., Ltd. is a specialized supplier of precision workholding systems, including vises, fixtures, and zero-point positioning solutions for high-end CNC machine tools. As both a manufacturer and a top-tier distributor of international brands such as Jergens (USA) and Schunk (Germany), we serve advanced industries including aerospace, automotive, and mold-making with high-precision, reliable products that enhance manufacturing efficiency and support industrial upgrading.
FAQ
Can you accept small quantities?
Yes, accept small quantity, fast delivery
Do you have pre-shipment inspection procedures?
Yes, we always test the products before delivery.
Can I take samples for testing?
Yes, samples can be sent for testing before bulk ordering.
When is the delivery time?
Inventory orders within 7-15 days, for oem and odm orders, the specific time depends on the actual situation.
What are the terms of payment?
Wire transfer or letter of credit, Western Union, Alipay, etc.
What is the minimum order quantity?
It depends on the product.
PQV
If you need customized products, Contact US !
Share to
Tag list
Request a Quote
We will contact you within one working day. Please pay attention to your email.
Related Products
Contact Us
E-Mail:VANSIM1128@outlook.com
Phone:+86-15931941570
WhatsApp:+86-15931941570
Address: No. 1 Factory Building, Fu Chang Road, Fu Chang Township, Jing Xiu District, Baoding City, Hebei Province, China