- 产品描述
- 手机端详情
-
Model Numbers: • 07100100 CV-100V • 07100160 CV-160V • 07100130 CV-130V • 07100200 CV-200V
Model: • 07105100 CV-100 • 07105160 CV-160 • 07105130 CV-130 • 07105200 CV-200
Characteristics
• Corner-clamp-type KEBEDE precision mechanical vise, suitable for precision machining on vertical and horizontal multi-task machining centers.
• Clamping system: screw clamping.
• The angular-clamping hemispherical pad generates angular-clamping locking force, thereby eliminating the floating of the jaw plate and workpiece tilting.
• Robust Material: The vise body is made of high-tensile nodular graphite cast iron (FCD600, 60 kgf/mm², 80,000 psi), offering exceptional tensile strength and resistance to deformation.
• All sliding surfaces of the vise’s bed are hardened by heat treatment to a hardness of HRC 45 or higher, ensuring long-lasting wear resistance and dimensional accuracy.
• The moving jaw adjustment screw allows for continuous fine-tuning of the vise to achieve optimal precision.
• The vise is available with four different jaw openings.
• Chip-proof design for the vise to prevent metal chips from falling into the lead screw and the vise’s interior, where they would be difficult to remove.
Excellent precision control—trustworthy and reliable.
Dimensional consistency: The vise is equipped with geometric positioning dimensions (as shown in Figure 1–14). Our products consistently maintain these dimensions and remain within the specified geometric tolerances.
In this way, regardless of when the product is purchased or subsequently upgraded, it will consistently maintain its original geometric positioning accuracy. Xiewei’s precision vices offer the aforementioned 14 levels of geometric positioning accuracy.MC Corner-Clamp Type / KEMPER-Type Precision Mechanical Vise
Model: • 07813100 SBD-100 • 07813160 SBD-160 • 07813250 SBD-250 • 07813130 SBD-130 • 07813200 SBD-200
All-steel rotary table
Features: The entire rotary table is constructed entirely from steel and undergoes hardening heat treatment, ensuring robustness, durability, and high precision.
Standard Accessories
1. Hand group
2. Alignment keys, 2 pcs
2 screws (M6 x 10L)
3. Vise fixing blocks, 4 pieces
4. Telescopic Chip-Proof Cover for Vise
Special Attachments
1. Special Tiger Mouth (P81, 82)
2. Rotary Table SBD (All-Steel)
The CV model is a mechanically actuated, functionally clamping device available in two precision grades: V and S. The V grade delivers world-class precision performance—fully compliant with the specifications shown in Figure 1-14—and represents a precision vise with perfectly synchronized geometric positioning accuracy, ensuring both fixed dimension control and perpendicularity. Regardless of when you originally purchased it, or whether you decide to add more units now or in the future, their geometric positioning accuracy will always remain fully consistent with the original. This eliminates the risk that each additional vise will fail to maintain the same level of geometric accuracy as the existing ones, thereby preventing inconsistencies and misalignment among multiple vises that could lead to workpiece damage. When selecting a vise, prioritize precision quality; KAWAI’s precision standards are truly trustworthy.
Dimensional Drawing
Patent on file
Order NO. Model A B C D E F G H I J J1 J2 J3 07100100 CV-100V 430 340 90 101 130 133 65 15 105 0-125 65-190 105-230 200-320 07105100 CV-100S 430 340 90 101 130 133 65 15 105 0-125 65-190 105-230 200-320 07100130 CV-130V 495 405 90 131 147 150 70 15 115 0-180 70-240 115-290 215-380 07105130 CV-130S 495 405 90 131 147 150 70 15 115 0-180 70-240 115-290 215-380 07100160 CV-160V 585 495 90 161 160 163 85 15 130 0-240 85-320 130-360 245-470 07105160 CV-160S 585 495 90 161 160 163 85 15 130 0-240 85-320 130-360 245-470 07100200 CV-200V 666 570 96 201 170 173 90 18 150 0-280 90-360 150-420 276-540 07105200 CV-200S 666 570 96 201 170 173 90 18 150 0-280 90-360 150-420 276-540 Order NO. Model K L M N P X X=0/-0.02 Y Y=0/-0.02 N.W. G.W. Shipment Size 07100100 CV-100V 48 22 260 16 19 45 YES 85 YES 24 26 600×220×185 07105100 CV-100S 48 22 260 16 19 45 NO 85 NO 24 26 600×220×185 07100130 CV-130V 55 22 260 18 19 65 YES 95 YES 37 39 665×250×205 07105130 CV-130S 55 22 260 18 19 65 NO 95 NO 37 39 665×250×205 07100160 CV-160V 58 22 260 18 19 65 YES 105 YES 57 59 760×280×215 07105160 CV-160S 58 22 260 18 19 65 NO 105 NO 57 59 760×280×215 07100200 CV-200V 63 22 260 18 19 82 YES 110 YES 77 80 860×320×225 07105200 CV-200S 63 22 260 18 19 82 NO 110 NO 77 80 860×320×225 -
Model Numbers: • 07100100 CV-100V • 07100160 CV-160V • 07100130 CV-130V • 07100200 CV-200V
Model: • 07105100 CV-100 • 07105160 CV-160 • 07105130 CV-130 • 07105200 CV-200
Characteristics
• Corner-clamp-type KEBEDE precision mechanical vise, suitable for precision machining on vertical and horizontal multi-task machining centers.
• Clamping system: screw clamping.
• The angular-clamping hemispherical pad generates angular-clamping locking force, thereby eliminating the floating of the jaw plate and workpiece tilting.
• Robust Material: The vise body is made of high-tensile nodular graphite cast iron (FCD600, 60 kgf/mm², 80,000 psi), offering exceptional tensile strength and resistance to deformation.
• All sliding surfaces of the vise’s bed are hardened by heat treatment to a hardness of HRC 45 or higher, ensuring long-lasting wear resistance and dimensional accuracy.
• The moving jaw adjustment screw allows for continuous fine-tuning of the vise to achieve optimal precision.
• The vise is available with four different jaw openings.
• Chip-proof design for the vise to prevent metal chips from falling into the lead screw and the vise’s interior, where they would be difficult to remove.
Excellent precision control—trustworthy and reliable.
MC Corner-Clamp Type / KEMPER-Type Precision Mechanical Vise
Model: • 07813100 SBD-100 • 07813160 SBD-160 • 07813250 SBD-250 • 07813130 SBD-130 • 07813200 SBD-200
All-steel rotary table
Features: The entire rotary table is constructed entirely from steel and undergoes hardening heat treatment, ensuring robustness, durability, and high precision.
Standard Accessories
1. Hand group
2. Alignment keys, 2 pcs
2 screws (M6 x 10L)
3. Vise fixing blocks, 4 pieces
4. Telescopic Chip-Proof Cover for Vise
Special Attachments
1. Special Tiger Mouth (P81, 82)
2. Rotary Table SBD (All-Steel)
The CV model is a mechanically actuated, functionally clamping device available in two precision grades: V and S. The V grade delivers world-class precision performance—fully compliant with the specifications shown in Figure 1-14—and represents a precision vise with perfectly synchronized geometric positioning accuracy, ensuring both fixed dimension control and perpendicularity. Regardless of when you originally purchased it, or whether you decide to add more units now or in the future, their geometric positioning accuracy will always remain fully consistent with the original. This eliminates the risk that each additional vise will fail to maintain the same level of geometric accuracy as the existing ones, thereby preventing inconsistencies and misalignment among multiple vises that could lead to workpiece damage. When selecting a vise, prioritize precision quality; KAWAI’s precision standards are truly trustworthy.
Dimensional Drawing
Patent on file
Exhibition
Introduction
Baoding Fanxu Machinery Manufacturing Co., Ltd. is a specialized supplier of precision workholding systems, including vises, fixtures, and zero-point positioning solutions for high-end CNC machine tools. As both a manufacturer and a top-tier distributor of international brands such as Jergens (USA) and Schunk (Germany), we serve advanced industries including aerospace, automotive, and mold-making with high-precision, reliable products that enhance manufacturing efficiency and support industrial upgrading.
FAQ
Can you accept small quantities?
Yes, accept small quantity, fast delivery
Do you have pre-shipment inspection procedures?
Yes, we always test the products before delivery.
Can I take samples for testing?
Yes, samples can be sent for testing before bulk ordering.
When is the delivery time?
Inventory orders within 7-15 days, for oem and odm orders, the specific time depends on the actual situation.
What are the terms of payment?
Wire transfer or letter of credit, Western Union, Alipay, etc.
What is the minimum order quantity?
It depends on the product.
CV
If you need customized products, Contact US !
Share to
Tag list
Request a Quote
We will contact you within one working day. Please pay attention to your email.
Related Products
Contact Us
E-Mail:VANSIM1128@outlook.com
Phone:+86-15931941570
WhatsApp:+86-15931941570
Address: No. 1 Factory Building, Fu Chang Road, Fu Chang Township, Jing Xiu District, Baoding City, Hebei Province, China